
Cooling Tower Water Filtration Installation
Equeron installed an Equeron 100 with 4” DIN flanges for cooling tower water filtration at a chemical facility in Melbourne, Australia.
What was needed? Industrial self-cleaning filtration for chemical process water, utility water, and cooling circuits that need reliable solids control.
Problems with Chemical Industry Filtration
When dealing with Chemical Industry, there are many water quality issues that must be addressed through filtration. Chemical plants often handle water streams with scale, corrosion products, particulate contamination, or process debris. Solids can foul heat exchangers, valves, spray equipment, and downstream process equipment. Maintenance access and uptime requirements make frequent manual filter servicing undesirable.
Water sources may vary, but the primary water sources for Chemical Industry filtration are: Process water, Cooling water, Plant utility water, and Intake water. These sources, however, are filled with contaminants like Scale, Corrosion products, Suspended solids, and Process debris which can be filtered at the 50-500 micron range.
Overview
Cooling tower water can collect suspended solids, scale, and biological debris as it circulates through the system. This installation used an automatic self-cleaning Equeron filter to help protect the cooling loop, support cleaner heat transfer surfaces, and reduce routine filter maintenance.
Results
The Equeron 100 has run without fault since installation, supporting chemical treatment performance and heat transfer efficiency while helping reduce conditions associated with Legionella risk.
