Equeron Logo

Troubleshooting

Why Is My Filter Flushing Too Often?

\

Learn the most common causes of excessive flush cycles and how to solve them.

If a self-cleaning filter is flushing too often, the filter may be doing exactly what it was designed to do: responding to fast debris buildup on the screen.[1][2] Frequent flushing is not automatically a controller problem. It is often a sign that the incoming water has more suspended solids than expected, the micron rating is too fine for the application, or the filter does not have enough effective screen area for the flow and debris load.

Common Causes

  • High suspended solids in the incoming water
  • Micron rating is too fine for the application
  • Filter is undersized for the flow rate
  • Differential pressure setpoint is too low
  • Flush cycle duration is too short
  • Flush valve or drain path is restricted
  • Seasonal algae, sediment, or stormwater conditions have changed the source water

How to Diagnose It

  • Record inlet pressure, outlet pressure, and differential pressure before and after a flush
  • Confirm the actual flow rate instead of relying on pump nameplate or pipe size
  • Inspect the screen for hard scale, biological matting, fibers, or embedded debris
  • Check whether the flush valve opens fully and discharges freely
  • Compare current water quality to the conditions used when the filter was selected

The fix depends on the cause.[3][4] If the screen is too fine, moving coarser may solve the problem without sacrificing equipment protection. If the filter is undersized, a larger unit or parallel filters may be needed. If the water source carries seasonal organics, pretreatment or chemistry control may be more effective than changing the controller.

Do not tune the setpoint blindly. Raising the differential-pressure trigger may reduce the number of flushes, but it also allows the screen to load more heavily before cleaning.[5][6] That can reduce downstream pressure or make the eventual cleaning cycle less effective. Treat control changes as the last step after confirming flow, screen condition, and flush discharge.

References

  1. University of Florida IFAS Extension, Screen Filters in Drip Irrigation Systems: https://ask.ifas.ufl.edu/publication/WI009
  2. Virginia Tech Extension, Filtration, Treatment, and Maintenance Considerations for Micro-Irrigation Systems: https://www.pubs.ext.vt.edu/442/442-757/442-757.html
  3. Oregon State University Extension, Inspecting and Maintaining Irrigation Systems: https://extension.oregonstate.edu/catalog/em-9869-inspecting-maintaining-irrigation-systems
  4. U.S. Geological Survey, Turbidity and Water: https://www.usgs.gov/water-science-school/science/turbidity-and-water
  5. World Health Organization, Water Quality and Health: Review of Turbidity: https://www.who.int/publications/i/item/WHO-FWC-WSH-17.01
  6. CDC, Controlling Legionella in Cooling Towers: https://www.cdc.gov/control-legionella/php/toolkit/cooling-towers-module.html

Share this via