Equeron Logo

Troubleshooting

Why Does My Filter Clog So Quickly?

\

Understand why filters clog prematurely and how to improve system performance.

A filter that clogs quickly is usually seeing more retained material than it can hold between cleaning events.[1][2][3] That may be because the water contains more solids than expected, the screen is too fine, the filter is undersized, or the debris is difficult to remove from the screen surface.

Likely Causes

  • High solids loading
  • Fine micron rating
  • Algae, biological growth, or organic debris
  • Filter selected by pipe size instead of flow rate
  • Insufficient screen area
  • Source-water changes after storms, seasonal turnover, construction, or process upsets

Look at the Debris

The fastest way to improve the diagnosis is to examine what is actually on the screen.[4][5] Grit and sand point toward source-water solids or upstream separation. Rust and scale may point to piping or treatment chemistry. Algae and biological slime suggest source-water management or pretreatment. Fibers may point to process contamination or intake conditions.

Solving rapid clogging requires identifying what is in the water and whether the filter has enough screen area for the flow and debris load. A self-cleaning filter may be appropriate when manual cleaning becomes too frequent, but automatic cleaning must still be sized for the real solids load.

If the debris is mostly mineral, upstream separation or a different micron rating may help. If it is biological or organic, source control, chemical treatment, or staged filtration may matter more.[6][7] If it is corrosion product, the filter is catching evidence of a system condition that should be corrected upstream or within the piping loop.

References

  1. University of Florida IFAS Extension, Screen Filters in Drip Irrigation Systems: https://ask.ifas.ufl.edu/publication/WI009
  2. Virginia Tech Extension, Filtration, Treatment, and Maintenance Considerations for Micro-Irrigation Systems: https://www.pubs.ext.vt.edu/442/442-757/442-757.html
  3. Oregon State University Extension, Inspecting and Maintaining Irrigation Systems: https://extension.oregonstate.edu/catalog/em-9869-inspecting-maintaining-irrigation-systems
  4. U.S. Geological Survey, Turbidity and Water: https://www.usgs.gov/water-science-school/science/turbidity-and-water
  5. U.S. EPA, Total Solids: https://archive.epa.gov/water/archive/web/html/vms58.html
  6. CDC, Controlling Legionella in Cooling Towers: https://www.cdc.gov/control-legionella/php/toolkit/cooling-towers-module.html
  7. ASHRAE Handbook, Cooling Towers: https://handbook.ashrae.org/Handbooks/S20/IP/s20_ch40/s20_ch40_ip.aspx

Share this via